How to set up a raspberry pi Part 2

Hey guys!
This is part 2 of How to set up a raspberry pi.

After you have downloaded and installed the OS (or extracted the zip file for multiboot,) plug in your raspberry pi and peripherals and connect it to the power. You will see things on the screen. If you used Raspbian then you will see a configuration screen after booting up. Use the keyboard to navigate the menu and configure your raspberry pi. (I recommend expanding the OS to use the whole SD card. I also DON'T recommend overclocking your raspberry pi as it can corrupt your SD card.)

If you used berryboot then after booting up, it will show a list of OSes to install. Choose one (Raspbian recommended) and wait for it to finish downloading. If you want to add another OS then click on "Add" and choose one.

Once you are done choosing your OSes, click on "Exit" and let the list load after booting.

Choose the OS that you want to load and press the enter key.

Congratulations! You have successfully set up your raspberry pi.
Thanks for reading!
-Technohacker